meg products econo-bore
1/2" Baltic birch plywood tool body with brass inserts to accept threaded stop pins, De-Sta-Co® toggle clamps ~ furnished with stop pins and indexing rod for ¼" and 5mm shelf pinsNEW$119.00 (available in 32mm and one inch formats)
32mm - European produces a line of 25 holes 32mm on center, an index hole at either end of the guide allows extension of the line - the inset of the line from the cabinet edge may be set at 37mm or varied in 10mm increments (six stop pin locations are provided)
One inch - traditional produces a line of 29 holes one inch on center, an index hole at either end of the guide allows extension of the line - the inset of the line from the cabinet edge can be set at one inch of varied in one fourth inch increments (twelve stop pin locations are provided)
note: the guide may be reversed, clamps lifted and holes bored in the center of a wide panel
go here to learn more about how the guide is used:
system holes shelf pin holes basic boring guide meg products econo-bore long pro-bore basic-bore nearly two feet longer than the econo-bore above - perfect for pantry, bookcase and closet work
1/2" Baltic birch plywood tool body with brass inserts to accept threaded stop pins, three De-Sta-Co® toggle clamps ~ furnished with stop pins and indexing rod for ¼" and 5mm shelf pins$178.50 (available in 32mm and one inch formats)
32mm - European produces a line of 43 holes 32mm on center, an index hole at either end of the guide allows extension of the line - the inset of the line from the cabinet edge may be set at 37mm or varied in 10mm increments (six stop pin locations are provided)
One inch - traditional produces a line of 51 holes one inch on center, an index hole at either end of the guide allows extension of the line - the inset of the line from the cabinet edge can be set at one inch of varied in one fourth inch increments (twelve stop pin locations are provided)
© 2000, c difranco